Control cabinet for liquid or powder spraying systems.

Description

The FCR standard cabinet is specifically designed to supply and control power or liquid paint spraying operations in a ventilated booth.
In the powder version, it is designed to accommodate the CRN, REV and other SAMES control modules. The FCR comes as a bare cabinet with a front panel for installing : standard 19" control units (not supplied), an electrical power supply module and an internal pneumatic supply kit included as standard.

Two models are available :
• The FCR 12, a low version capable of controlling up to 12 powder spray guns.
• The FCR 24, a tall version capable of controlling up to 24 powder spray guns.

Custumer benefits

The standard FCR cabinet, used in conjunction with its various modules, controls the following functions :
• 12 spray control devices switched on and off via a part detector and time-delay device.
• Electrical power supply module for an REV700 control module (or up to two REV600 modules).
• Electrical and pneumatic supply units for 12 to 24 control modules (depending on model - FCR 12 or FCR 24).
• Auxiliary pneumatic supply unit (for powder tank for example).
• Tank powder level detector. Electrical power supply module (1) The main module is installed by default at the top of the cabinet, in front of the other modules.
• A miniature PLC is supplied as standard with the main control module to set the spray on/off time according to the part detector setting.
When no REV control module is installed, this module alone can manage the spray on/off timers according to the detection function.
The default settings of the miniature PLC are as follows :
• Time before spraying starts after detection T1 = 05 s.
• Time before spraying stops after detection T2 = 15 s.
Values T1 and T2 can be adjusted from 0 to 99 s.